Flintec MCS-08 Manual de usuario descargar pdf (Pagina 43)

MCS-08 Technical Manual, Rev. 1.04 December 2012 Page 43 of 52

11. MCS-08PN – PROFINET GATEWAY

The MCS-08PN gateway module integrates up to 8 pcs. MCS-08AD A/D Converter modules and up to 8 pcs.

MCS-08IO Digital I/O modules to an external ProfiNet network. The MCS-08PN gateway module

communicates with other MCS-08 modules via the internal N-bus and responses to the PLC via ProfiNet.

The GSD file is available on a CD which is supplied together with the instrument.

11.1. Front View

There are 6 status LEDs on the front panel which indicate the operational module status (Refer to table 11.1)

and the ProfiNet status. The setup switch on front panel of the module is used for N-bus addressing without PC

(Refer to chapter 5.6) and for diagnostics (Refer to chapter 15).

When the error LED is ON, the other two LED indicate the error type (Refer to chapter 14 for details).

ProfiNet connection, power supply and serial interface terminals are located at the front of the DIN rail mount

module (See figure 11.1).

Status LEDs

ProfiNet connector

RS-232C connector

Setup Switch

Power Supply Terminal

Figure 11.1 – Front view

The meanings of these LEDs in operation are described below.

Status LEDs

Symbol

Name

Description

Pwr

Power

Module is energized

Module is de-energized. Check power cable

Lnk

Link

Communication takes place

No communication

Err

Error

Error. Refer to error table in chapter 14

No error

Off On Off for 0.3 seconds

Table 11.1 – Status LEDs

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 51 52

Sin comentarios

Flintec MCS-08 Manual de usuario Pagina 43